Geotechnical Engineering Standards - Standards Products - Standards & Publications - Products & Services

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

ASTM's geotechnical engineering standards are instrumental in specifying, testing, and investigating the physical/mechanical properties and characteristic behaviors of surface and subsurface earth materials that are relevant to a construction project. Such earth materials include soil, dimension stones, slate, soil-cement mixtures, ground water, bituminous geomembranes, slurry, rock mass, aquifers, and geotextiles. These geotechnical engineering standards allow engineering firms and construction companies to examine the elastic characteristics, flow, and erosion behavior of the said earth materials to ensure safety and prevent unforeseen hazards related to the erection of civil structures.

Geotechnical Engineering Standards

ASTM's geotechnical engineering standards are instrumental in specifying, testing, and investigating the physical/mechanical properties and characteristic behaviors of surface and subsurface earth materials that are relevant to a construction project. Such earth materials include soil, dimension stones, slate, soil-cement mixtures, ground water, bituminous geomembranes, slurry, rock mass, aquifers, and geotextiles. These geotechnical engineering standards allow engineering firms and construction companies to examine the elastic characteristics, flow, and erosion behavior of the said earth materials to ensure safety and prevent unforeseen hazards related to the erection of civil structures.

Jump to:

Attachment Components and Systems

C1242-24 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

Characterization and Handling of Powders and Bulk Solids

D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices

D6941-19 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

D6940/D6940M-20 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester (Withdrawn 2017)

D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders (Withdrawn 2021)

D8081-17(2021)e1 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell

D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester

D6128-22 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester

D8327-24 Standard Test Method for Measuring the Permeability of Powders as a Function of Consolidation Using the Freeman Technology FT4 Powder Rheometer

D8328-24 Standard Test Method for Dynamic Testing of Powders Using the Freeman Technology FT4 Powder Rheometer

D7891-24 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell

Cyclic and Dynamic Properties of Soils

D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing

D5311/D5311M-13 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022)

D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements

D8296-19 Standard Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control

D4428/D4428M-14 Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)

D3999/D3999M-11e1 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)

D4015-21 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices

Deep Foundations

D3966-90(1995) Standard Test Method for Piles Under Lateral Loads (Withdrawn 2005)

D3689-90(1995) Standard Test Method for Individual Piles Under Static Axial Tensile Load (Withdrawn 2005)

D7949-14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023)

D6760-16 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

D4945-17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

D8169/D8169M-18 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load

D8232-18 Standard Test Procedures for Measuring the Inclination of Deep Foundations

D7383-19 Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations

D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

D1143-81(1994)e1 Standard Test Method for Piles Under Static Axial Compressive Load (Withdrawn 2006)

D8381/D8381M-21 Standard Test Methods for Measuring the Depth of Deep Foundations by Parallel Seismic Logging

D3689/D3689M-22 Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load

D3966/D3966M-22 Standard Test Methods for Deep Foundation Elements Under Static Lateral Load

D1143/D1143M-20e1 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load

Editorial and Terminology

D4439-24a Standard Terminology for Geosynthetics

Endurance Properties

D5596-03(2021) Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

D5970/D5970M-16(2021) Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

D6388-18 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

D5885/D5885M-20 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

D8117-21 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry

D5747/D5747M-21 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

D4355/D4355M-21 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus

D5262-21 Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes

D6213-17 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

D7406-20 Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products

D5397-20 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

D4594/D4594M-96(2020) Standard Test Method for Effects of Temperature on Stability of Geotextiles

D5496-15(2020) Standard Practice for In-Field Immersion Testing of Geosynthetics

D7409-15(2020) Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns

D5721-22 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

D5819-22 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

D1987-22 Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters

D6992-16(2023) Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

D7361-07(2023) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

D4886-23 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)

D5322-23 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

D6389-23 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

Environmental Properties, Behavior, and Cleaning

C1515-20 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

C1496-18 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

C1722-23 Standard Guide for Repair and Restoration of Dimension Stone

Erosion and Sediment Control Technology

D6939-03 Standard Practice for Brushmattressing (Withdrawn 2012)

D7207-05 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions (Withdrawn 2014)

D6765-13e1 Standard Practice for Live Staking (Withdrawn 2022)

D8326-21 Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall

D6685-01(2015) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024)

D6884-03(2015)e1 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems (Withdrawn 2024)

D7986-17a Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing

D8122-21 Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings

D7351/D7351M-21 Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications

D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate

D6599-00(2014)e2 Standard Practice for Construction of Live Fascines on Slopes (Withdrawn 2023)

D6449-99(2015)e1 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method) (Withdrawn 2024)

D7101-13e1 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022)

D6684-18 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems

D6459-19 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

D8151-19e1 Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing

D8199-20 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control

D6475-17 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets

D6462-19 Standard Practice for Silt Fence Installation and Maintenance

D6461-99(2007)e2 Standard Specification for Silt Fence Materials (Withdrawn 2016)

D6629-01(2012)e1 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion (Withdrawn 2019)

D8123-22 Standard Test Methods for Measuring the Opening Size of Geohazard Nettings

D7014-22 Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses

D7367/D7367M-22 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

D6711/D6711M-22 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

D7560-22 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)

D7208-23 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

D6826-23 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills

D8263/D8263M-23 Standard Test Method for Determining the Change in Mass of Rolled Erosion Control Products When Submerged in Water

D7276-16(2023) Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

D7277-16(2023) Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

D7047-23 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)

D8297/D8297M-23 Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope

D8298/D8298M-23 Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope

D586-23 Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products

D7322/D7322M-23 Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

D6460-24 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

D8202-18(2024) Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches

D8198-18(2024) Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches

D8082-18(2024)e1 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application

Field Instrumentation

D7764-20 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

D7299-20 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

D4622-86(1993) Standard Test Method for Rock Mass Monitoring Using Inclinometers (Withdrawn 2000)

D6230-21e1 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers

D6598-19 Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations

D4403-20 Standard Practice for Extensometers Used in Rock

Frozen Soils and Rock

D4083-89(2016) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

D5918-13e1 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022)

D7099-04(2018) Standard Terminology Relating to Frozen Soil and Rock

D5780-18 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load

D7300-18 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

D6035/D6035M-19 Standard Test Methods for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

Geomembranes

D7909-21a Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes

D6497/D6497M-02(2021) Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

D3745/D3745M-95(2015)e1 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type) (Withdrawn 2016)

D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes

D7982-15(2021) Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels

D7865-13(2021) Standard Guide for Identification, Packaging, Handling, Storage, and Deployment of Fabricated Geomembrane Panels

D7004/D7004M-03(2021) Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

D7003/D7003M-03(2021) Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

D5641/D5641M-16 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber

D6747-21 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes

D7240-18 Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)

D7056-07(2018) Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams

D7275-07(2018) Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)

D7274-06A(2018)e1 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)

D6365-99(2018) Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test

D6455-11(2018) Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)

D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

D7953-20 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method

D7407-07(2020) Standard Guide for Determining the Transmission of Gases Through Geomembranes

D6693/D6693M-20 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

D4545-86(1999) Standard Practice for Determining the Integrity of Factory Seams Used in Joining Manufactured Flexible Sheet Geomembranes (Withdrawn 2008)

D7002-22 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method

D7700-22 Standard Guide for Selecting Test Methods for Geomembrane Seams

D7703-22 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method

D8468-23 Standard Practice for Data Recording Procedure for Welding Devices Used to Produce Thermal Fusion Welds in Geomembrane Systems

D4885-01(2023) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method

D8172/D8172M-18(2023)e1 Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes

D5323-19a(2023) Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

D5494-93(2023) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

D5886-95(2023) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications

D6636-01(2023) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

D7272-06(2023) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods

D7852-23 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys

D7106/D7106M-05(2023) Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

D8265-23 Standard Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes

D6392-23 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

D4437/D4437M-16(2023) Standard Practice for Nondestructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes

D5820-95(2023) Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes

D7747/D7747M-11(2023) Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

D7749/D7749M-11(2023)e1 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

D6214/D6214M-23 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods

D7006-23 Standard Practice for Ultrasonic Testing of Geomembranes

D7466/D7466M-23 Standard Test Method for Measuring Asperity Height of Textured Geomembranes

D5884/D5884M-23 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

D5617-23 Standard Test Method for Multi-Axial Elongation of Geomembranes

D7007-24 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials

D5514/D5514M-24 Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics

D8551-24a Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location

D8580-24 Standard Practice for Wedge Welding of Polymeric Geomembranes

Geosynthetic Clay Liners

D5890-19 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

D7702/D7702M-14(2021) Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics

D5891/D5891M-19 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

D6243/D6243M-20 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method

D6766-20a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

D6768/D6768M-20 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners

D5889/D5889M-18(2022) Standard Practice for Quality Control of Geosynthetic Clay Liners

D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners

D6141-18(2022) Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

D6495/D6495M-18(2022) Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

D8204-18(2022) Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners

D6102-23 Standard Guide for Installation of Geosynthetic Clay Liners

D6496/D6496M-23a Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

D5887/D5887M-23 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

D5888-19(2024) Standard Guide for Storage and Handling of Geosynthetic Clay Liners

D6072/D6072M-19(2024) Standard Practice for Obtaining Samples of Geosynthetic Clay Liners

Geosynthetic Erosion Control

D6524/D6524M-16(2021) Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)

D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within

D6818-21 Standard Test Method for Tensile Properties of Rolled Erosion Control Products

D6454/D6454M-99(2021) Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)

D6575/D6575M-22 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

D8030/D8030M-23 Standard Practice for Sample Preparation for GCCM

D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

D6525/D6525M-18(2023) Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products

D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats

D8203-18(2023) Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device

D8173-23 Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats

D8480-23 Standard Test Method for Determining the Tensile Strength of GCCM Materials

D6567-23 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)

D8479-24 Standard Test Method for Determining the Peel Strength of GCCM Materials

Geosynthetic Specifications

D7180/D7180M-05(2021) Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

D4873/D4873M-17(2021) Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

D7557/D7557M-09(2021) Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

D6817/D6817M-17(2021) Standard Specification for Rigid Cellular Polystyrene Geofoam

D7177/D7177M-21 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes

D8364/D8364M-21 Standard Specification for Geosynthetic Cementitious Composite Mat (GCCM) Materials

D2643/D2643M-21 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)

D7001-20 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

D7408-12(2020) Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

D6461/D6461M-22 Standard Specifications for Silt Fence Materials

D8427-21 Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling

D7008-08(2022) Standard Specification for Geosynthetic Alternate Daily Covers

D7176-22 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications

D7239-13(2023) Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

D7465/D7465M-15(2023) Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

D7613-17(2023) Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes

D6707/D6707M-06(2024) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

Geotechnics of Sustainable Construction

D7762-18e1 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

D7760-18 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter

D7765-18a Standard Practice for Use of Foundry Sand in Structural Fill and Embankments

D8012-18 Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications

E850-10 Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill (Withdrawn 2019)

D8038-16(2022)e1 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material

Groundwater and Vadose Zone Investigations

D6001/D6001M-20 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

D5981/D5981M-18 Standard Guide for Calibrating a Groundwater Flow Model Application

D5717-95e1 Standard Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)

D5872/D5872M-18 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

D5875/D5875M-18 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

D5781/D5781M-18 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

D5299/D5299M-18 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

D7648/D7648M-18 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment (Withdrawn 2024)

D6911-15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis (Withdrawn 2024)

D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability (Withdrawn 2024)

D4700-15 Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024)

D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling (Withdrawn 2023)

D6036-96(2014) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023)

D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers (Withdrawn 2024)

D5269-15 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024)

D4044/D4044M-15 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers (Withdrawn 2024)

D6000/D6000M-15e1 Standard Guide for Presentation of Water-Level Information from Groundwater Sites (Withdrawn 2024)

D5611-94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

D5609-16 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

D5608-16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites

D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

D7048-16 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

D4043-17 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

D6312-17 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities

D7045-17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities

D6285-99(2016) Standard Guide for Locating Abandoned Wells

D8037/D8037M-16 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils

D6170-17 Standard Guide for Selecting a Groundwater Modeling Code

D5786-17 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

D7758-17 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

D8106-17 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay

D5447-17 Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem

D6067/D6067M-17 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity

D5783-18 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5782-18 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

D5784/D5784M-18 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

D5521/D5521M-18 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

D7352-18 Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods

D5979-96(2019)e1 Standard Guide for Conceptualization and Characterization of Groundwater Systems

D5737/D5737M-19 Standard Guide for Methods for Measuring Well Discharge

D7626-19e1 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

D4050-20 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

D5787-20 Standard Practice for Monitoring Well Protection At or Near Land Surface

D7929-20 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells

D8408/D8408M-21 Standard Guide for Development of Long-Term Monitoring Plans for Vapor Mitigation Systems

D5088-20 Standard Practice for Decontamination of Field Equipment Used at Waste Sites

D6286/D6286M-20 Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization

D5254/D5254M-92(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site (Withdrawn 2019)

D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023)

D6106-97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers (Withdrawn 2019)

D6171-97(2010) Standard Guide for Documenting a Groundwater Modeling Code (Withdrawn 2019)

D5880-95(2006) Standard Guide for Subsurface Flow and Transport Modeling (Withdrawn 2015)

D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information (Withdrawn 2023)

D5410-93(2007) Standard Guide for Set of Data Elements to Describe a Groundwater Site;
Part ThreeUsage Descriptors (Withdrawn 2016)

D6565-00(2005) Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method (Withdrawn 2014)

D7242/D7242M-06(2013)e1 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022)

D5314-92(2006) Standard Guide for Soil Gas Monitoring in the Vadose Zone (Withdrawn 2015)

D5408-93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site;
Part OneAdditional Identification Descriptors (Withdrawn 2019)

D5754-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsTrilinear Diagrams for Two or More Analyses (Withdrawn 2015)

D5877-95(2005) Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams Based on Data Analytical Calculations (Withdrawn 2014)

D6025-96(2008) Standard Guide for Developing and Evaluating Groundwater Modeling Codes (Withdrawn 2017)

D5981-96(2008) Standard Guide for Calibrating a Groundwater Flow Model Application (Withdrawn 2017)

D6168-97(2010) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids (Withdrawn 2019)

D4696-18 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

D5409/D5409M-93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part TwoPhysical Descriptors (Withdrawn 2019)

D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application (Withdrawn 2022)

D4631-18 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

D5738-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams for Single Analyses (Withdrawn 2015)

D6634/D6634M-14 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells (Withdrawn 2023)

D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)

D5911/D5911M-96(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site (Withdrawn 2019)

D6187-97(2010) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence (Withdrawn 2019)

D5912-20 Standard Practice for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)

D4630-19 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

D6642-01(2006) Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux (Withdrawn 2015)

D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes (Withdrawn 2022)

D5472/D5472M-20 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well

D5473/D5473M-20 Standard Practice for (Analytical Procedures) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

D6034-20 Standard Practice for (Analytical Procedure) Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

D5850-20 Standard Practice for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

D5881-20 Standard Practice for (Analytical Procedures) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

D4104/D4104M-20 Standard Practice for (Analytical Procedures) Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

D4105/D4105M-20 Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

D5716/D5716M-20 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

D6028/D6028M-20 Standard Practice for (Analytical Procedure) Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

D8170-20 Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis

D5855/D5855M-20 Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

D4106-20 Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

D6029/D6029M-20 Standard Practice for (Analytical Procedures) Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

D5785/D5785M-20 Standard Practice for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

D5920/D5920M-20 Standard Practice for (Analytical Procedure) Tests of Anisotropic Unconfined Aquifers by Neuman Method

D5270/D5270M-20 Standard Practice for (Analytical Procedures) Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

D5474-93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations (Withdrawn 2021)

D6771-21 Standard Practice for Low-Flow Purging and Sampling Used for Groundwater Monitoring

D6169/D6169M-21 Standard Guide for Selection of Subsurface Soil and Rock Sampling Devices for Environmental and Geotechnical Investigations

D8460-22 Standard Test Method for Quantification of Volatile Organic Compounds Using Proton Transfer Reaction Mass Spectrometry

D5903-96(2023) Standard Guide for Planning and Preparing for a Groundwater Sampling Event

D5745-23 Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation

D7262-23 Standard Test Methods for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

D6089-19(2023) Standard Guide for Documenting a Groundwater Sampling Event

D6452-18(2023) Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations

D6517-18(2023) Standard Guide for Field Preservation of Ground Water Samples

D6914/D6914M-16(2024) Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

D5876/D5876M-17(2024) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

D5978/D5978M-16(2024) Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

D5980-16(2024) Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

D6031/D6031M-24 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

D6564/D6564M-17(2024) Standard Guide for Field Filtration of Groundwater Samples

D7069-24 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

D6725/D6725M-16(2024)e1 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

D7663-12(2024) Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

D5092/D5092M-16(2024) Standard Practice for Design and Installation of Groundwater Monitoring Wells

Grouting

D4380-20 Standard Test Method for Determining Density of Construction Slurries

D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils

D4320/D4320M-09 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters (Withdrawn 2018)

D4016-14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) (Withdrawn 2023)

D6910/D6910M-19 Standard Test Method for Marsh Funnel Viscosity of Construction Slurries

D4219-22 Standard Test Method for Short-Term Unconfined Compressive Strength Index of Chemically Grouted Soils

D4381/D4381M-22 Standard Test Method for Sand Content by Volume of Construction Slurries

Hydraulic Fracturing

D8053-18 Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing

D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves

D8006-24 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations

Hydrologic Properties and Hydraulic Barriers

D2325-68(2000) Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus (Withdrawn 2007)

D3152-72(2000) Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus (Withdrawn 2007)

D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)

D5298-16 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge

D7503-18 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024)

D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test

D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

D4511-11(2020) Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

D7100-11(2020) Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

D7243-11(2020) Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

D6539-13 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)

D6527-00(2008) Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation (Withdrawn 2017)

D2434-22 Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils

D5084-24 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

Identification and Classification of Soils

D2488-17e1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)

D2487-17e1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

D4452/D4452M-22 Standard Practice for X-Ray Radiography of Soil Samples

D4427-23 Standard Classification of Peat Samples by Laboratory Testing

D3282-24 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

Information Retrieval and Data Automation

D5720-95(2009) Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes (Withdrawn 2018)

D6453-99 Standard Guide for Format of Computerized Exchange of Soil and Rock Test Data (Withdrawn 2008)

D6027/D6027M-24 Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes

D4753-24 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

Material Specifications

C406/C406M-22 Standard Specification for Roofing Slate

C568/C568M-22 Standard Specification for Limestone Dimension Stone

C616/C616M-22 Standard Specification for Quartz-Based Dimension Stone

C629/C629M-22 Standard Specification for Slate Dimension Stone

C1526-19(2023)e1 Standard Specification for Serpentine Dimension Stone

C615/C615M-23 Standard Specification for Granite Dimension Stone

C503/C503M-23 Standard Specification for Marble Dimension Stone

C1527/C1527M-23 Standard Specification for Travertine Dimension Stone

Mechanical Properties

D6638-18 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

D5321/D5321M-21 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

D8102-17 Standard Practice for Manufacturing Quality Control of Geotextiles

D6706-01(2021) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

D7748/D7748M-14(2021) Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles, and Related Products

D8269-21 Standard Guide for the Use of Geocells in Geotechnical and Roadway Projects

D6244-06(2018) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

D6364-06(2018) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics

D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles

D7179-18 Standard Test Method for Determining Geonet Breaking Force

D6916-18 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

D8105-18 Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results

D7556-10(2019) Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

D4354-12(2020) Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing

D4833/D4833M-07(2020) Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

D7273/D7273M-08(2020) Standard Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

D7853-13(2020) Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete

D4759-11(2018)e1 Standard Practice for Determining the Specification Conformance of Geosynthetics

D8462-22 Standard Test Method for Cyclic Plate Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics

D5818-22 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics

D4884/D4884M-22 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

D6241-22a Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe

D7499/D7499M-09(2023) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness

D4632/D4632M-15a(2023) Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

D7737/D7737M-15(2023) Standard Test Method for Individual Geogrid Junction Strength

D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids

D4533/D4533M-15(2023) Standard Test Method for Trapezoid Tearing Strength of Geotextiles

D6637/D6637M-15(2023) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

D7005/D7005M-16(2024) Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

D4595/D4595M-24 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method

D8212-24e1 Standard Practice for Determination of the Radial Tensile Properties of Geogrids Under Low Radial Strain

Media for Plant Growth

D2980-17e1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials

D5883-18 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

D5539-14 Standard Specification for Seed Starter Mix (Withdrawn 2019)

D2974-20e1 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils

D1997-20 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass

D5435-13 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection (Withdrawn 2019)

D2944-22 Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes

D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes

D2976-22a Standard Test Method for pH of Peat Materials

D5715-23 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

D8438/D8438M-23 Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples

D2978-23 Standard Test Method for Volume of Peat and Peat-Based Growing Media

D5268-23 Standard Specification for Topsoil Used for Landscaping and Construction Purposes

D2973-23 Standard Test Method for Total Nitrogen in Peat Materials

D4531-23 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products

D8249-19(2024) Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

D4544-20(2024) Standard Practice for Estimating Peat Deposit Thickness

D4972-19(2024)e1 Standard Test Methods for pH of Soils

Nomenclature and Definitions

C119-23 Standard Terminology Relating to Dimension Stone

Permeability and Filtration

D6574/D6574M-13(2021) Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

D6767-21 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

D8057-17 Standard Specification for Inlet Filters with a Rigid Frame

D4751-21a Standard Test Methods for Determining Apparent Opening Size of a Geotextile

D5567-94(2018) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

D5199-12(2019) Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

D7701-11 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020)

D7931/D7931M-21a Standard Guide for Specifying Drainage Geocomposites

D6917-16(2022) Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

D7498/D7498M-09(2022) Standard Test Method for Vertical Strip Drains Using a Large-Scale Consolidation Test

D6088-06(2022) Standard Practice for Installation of Geocomposite Pavement Drains

D4491/D4491M-22 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

D4716/D4716M-22 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

D6918-09(2022) Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

D6523-22 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

D7178-22 Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles

D6140-22 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

D7880/D7880M-22 Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag

D5493-23 Standard Test Method for Permittivity of Geotextiles Under Load

D8490-23a Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method

D5141-23 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

D5101-23 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

Physical-Chemical Interactions of Soil and Rock

D6572-21 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

D4373-21 Standard Test Method for Rapid Determination of Carbonate Content of Soils

D5143-06(2015)e1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023)

D4404-18 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

D4647/D4647M-13(2020) Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

D4319-93(2001) Standard Test Method for Distribution Ratios by the Short-Term Batch Method (Withdrawn 2007)

D8262-22 Standard Test Method for Determining the pH of Granular Material for Use in Embankments, Subgrades, and Retaining Wall Backfil

D4542-22 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

D8459-23 Standard Test Methods for Detecting Water Soluble Sulfates in Construction Soils

Quality Control

D5522-99a Standard Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid (Withdrawn 2004)

D5255-15(2023) Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

D3740-23 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

Rock for Erosion Control

D8281/D8281M-21 Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol

D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024)

D5313/D5313M-21 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

D5240/D5240M-20 Standard Test Method for Evaluation of the Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

D5312/D5312M-21 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

D6092-21 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

D6825-21 Standard Guide for Placement of Riprap Revetments

D4992-22 Standard Practice for Evaluation of Rock to be Used for Erosion Control

D5121-22 Standard Practice for Preparation of Rock Slabs for Durability Testing

D6473/D6473M-24 Standard Test Method for Specific Gravity and Absorption of Rock for Erosion Control

D5779/D5779M-24 Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control

Rock Mechanics

D4506-21 Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test

D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement (Withdrawn 2005)

D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017)

D4554-12 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021)

D4535-21 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

D4611-16 Standard Test Method for Specific Heat of Rock and Soil

D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil

D4644-16 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks

D7070-16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge

D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

D4971-16 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

D4394-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

D4395-17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

D8359-21 Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer

D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)

D2845-08 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017)

D4555-10 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test (Withdrawn 2019)

D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements (Withdrawn 2005)

D4406-04 Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression (Withdrawn 2005)

D4405-04 Standard Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions (Withdrawn 2005)

D2938-95(2002) Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens (Withdrawn 2005)

D4341-03 Standard Test Method for Creep of Cylindrical Hard Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)

D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression (Withdrawn 2005)

D4553-18 Standard Test Method for Determining In Situ Creep Characteristics of Rock

D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)

D4543-19 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

D4436-13e1 Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022)

D4729-19 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method

D4645-08 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method (Withdrawn 2017)

D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023)

D5878-19 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

D4879-08 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock (Withdrawn 2017)

D5079-08 Standard Practices for Preserving and Transporting Rock Core Samples (Withdrawn 2017)

D7625-22 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Abrasiveness Index Method

D3967-23 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens with Flat Loading Platens

D7012-23 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

D5334-22ae1 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure

D5335-24 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

Sampling and Related Field Testing for Soil Evaluations

D5778-20 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

D2113-14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)

D5852-00(2007)e1 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method (Withdrawn 2016)

D6151/D6151M-15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024)

D6635-15 Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024)

D1587/D1587M-15 Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024)

D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers

D7015/D7015M-18 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils

D3213-19 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

D4220/D4220M-14 Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023)

D3441-16 Standard Test Method for Mechanical Cone Penetration Testing of Soils

D3550/D3550M-17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

D3550-01(2007) Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils (Withdrawn 2016)

D4719-20 Standard Test Methods for Prebored Pressuremeter Testing in Soils

D6066-11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020)

D5434-12 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)

D1586/D1586M-18e1 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

D6519/D6519M-23 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

D1452/D1452M-24 Standard Practice for Soil Exploration and Sampling by Auger Borings

Selection of Dimension Stone

C1528/C1528M-20 Standard Guide for Selection of Dimension Stone

C1799/C1799M-22e1 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation

Special and Construction Control Tests

D5030-89(1994)e1 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit (Withdrawn 2003)

D6780/D6780M-19 Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)

D6758-18e1 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

D5220/D5220M-21 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

D7698-21 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

D7759/D7759M-21 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

D5030/D5030M-21 Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit

D2167-15 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)

D1241-15 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024)

D4914/D4914M-16 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

D1556/D1556M-15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)

D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating

D4944-18 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

D5195-21 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

D4564-08e1 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method (Withdrawn 2013)

D4429-09a Standard Test Method for CBR (California Bearing Ratio) of Soils in Place (Withdrawn 2018)

D3017-05 Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth) (Witthdrawn 2007)

D2922-05 Standard Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) (Withdrawn 2007)

D1558-10 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils (Withdrawn 2019)

D5080-20 Standard Test Method for Rapid Determination of Percent Compaction

D7380/D7380M-21 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 2.3-kg [5-lbm] Dynamic Cone Penetrometer

D8153-22 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe

D2844/D2844M-18e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

D7013/D7013M-23 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)

D6938-23 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

D4959-24 Standard Test Method for Determination of Water Content of Soil By Direct Heating

D5874-24 Standard Test Methods for Determination of the Impact Value (IV) of a Soil

D2937-24 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

Stabilization With Admixtures

D2901-99 Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006)

D3668-78(1985) Standard Test Method for Bearing Ratio of Laboratory Compacted Soil-Lime Mixtures (Withdrawn 1997)

D4223/D4223M-20 Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils

D6103-04 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) (Withdrawn 2013)

D6103/D6103M-17e1 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)

D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024)

D560/D560M-16 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures

D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

D6024/D6024M-16 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

D5971/D5971M-16 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

D806-19 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

D1411-09 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes (Withdrawn 2018)

D3877-08 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures (Withdrawn 2017)

D3155-11 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures (Withdrawn 2020)

D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

D6236-11 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil (Withdrawn 2020)

D4609-08 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization (Withdrawn 2017)

D6276-19 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

D5239-12e1 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization (Withdrawn 2021)

D4832/D4832M-23 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens

D559/D559M-15(2023) Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures

D5102/D5102M-24 Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

Standards Development and Review

D6026-21 Standard Practice for Using Significant Digits and Data Records in Geotechnical Data

Strength and Compressibility of Soils

D4829-21 Standard Test Method for Expansion Index of Soils

D4546-21 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

D7181-20 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils

D4767-11(2020) Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

D2435/D2435M-11(2020) Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

D5333-03 Standard Test Method for Measurement of Collapse Potential of Soils (Withdrawn 2012)

D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils

D6467-21e1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils

D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils

D3080/D3080M-23 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

D4648/D4648M-24 Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated Fine-Grained Soil

D2850-24 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

D4186/D4186M-20e2 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

D2166/D2166M-24 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

D8121/D8121M-23 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device

D6528-24 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine-Grained Soils

Surface and Subsurface Investigation

D5879/D5879M-18 Standard Practice for Surface Site Characterization for On-Site Septic Systems

D5518-94e1 Standard Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions (Withdrawn 2003)

D5925-96e1 Standard Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems (Withdrawn 2005)

D7533/D7533M-09 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area (Withdrawn 2013)

D7534/D7534M-09 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit (Withdrawn 2013)

D7627-10 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine (Withdrawn 2013)

D7628-10 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas (Withdrawn 2013)

D7629/D7629M-10 Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features (Withdrawn 2013)

D7630/D7630M-10 Standard Practice for Minimum Geospatial Data for Postmining Land Uses (Withdrawn 2013)

D7631-10 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location (Withdrawn 2013)

D6726-15 Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction (Withdrawn 2024)

D6727/D6727M-16 Standard Guide for Conducting Borehole Geophysical Logging—Neutron

D6430-18 Standard Guide for Using the Gravity Method for Subsurface Site Characterization

D6431-18 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization

D5753-18 Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging

D7128-18 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

D5924-18 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

D5995-18 Standard Guide for Environmental Site Investigation in Cold Regions

D6235-18 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

D5923-18 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

D5922-18 Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations

D6274-18 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

D6167-19 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

D6432-19 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

D8299-19 Standard Guide for Using Metal Ratios in Soils to Distinguish Between Anthropogenic and Natural Beryllium

D6820-20 Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation

D7699/D7699M-20 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

D420-18 Standard Guide for Site Characterization for Engineering Design and Construction Purposes

D5714-95(2002) Standard Specification for Content of Digital Geospatial Metadata (Withdrawn 2011)

D7046-11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration (Withdrawn 2020)

D5921-96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems (Withdrawn 2019)

D6639-18 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations

D7384-10 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary (Withdrawn 2013)

D7443-10 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents (Withdrawn 2013)

D5549-19 Standard Guide for Contents of Geostatistical Site Investigation Report

D5730-04 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013)

D5777-18 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

D7780-20 Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features

D6429-23 Standard Guide for Selecting Surface Geophysical Methods

Terminology for Soil, Rock and Contained Fluids

D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids

Test Methods

C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone

C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

C99/C99M-18 Standard Test Method for Modulus of Rupture of Dimension Stone

C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate

C1353/C1353M-20e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser

C121/C121M-20 Standard Test Method for Water Absorption of Slate

C1201/C1201M-20 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

C241/C241M-21 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

C1354/C1354M-22 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

C1721-22 Standard Guide for Petrographic Examination of Dimension Stone

C217/C217M-22 Standard Test Methods for Weather Resistance of Slate

C170/C170M-24a Standard Test Method for Compressive Strength of Dimension Stone

C880/C880M-24 Standard Test Method for Flexural Strength of Dimension Stone

Texture, Plasticity and Density Characteristics of Soils

D2217-85(1998) Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2007)

D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens

D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis

D4254-16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))

D1557-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))

D1140-17 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils (Withdrawn 2024)

D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors

D4253-16e1 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer

D427-04 Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008)

D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016)

D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016)

D2216-19 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

D5550-23 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

D4718/D4718M-15(2023) Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

D854-23 Standard Test Methods for Specific Gravity of Soil Solids by the Water Displacement Method

D4943-18(2024) Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method

Workplace Air Quality

D7035-21 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7707-21 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

E1370-21 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

D6562-20 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry

D5836-20 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

D5932-20 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

D3686-20 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

D6561-20 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler

D7773-19 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography

D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter

D7144-21 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids

D5578-04(2015) Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024)

D4599-21 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

D4844-16 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection

D4766-21 Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023)

D6877-13(2018) Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

D6246-08(2018) Standard Practice for Evaluating the Performance of Diffusive Samplers

D6966-18 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

D6061-01(2018)e1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers

D4765-13(2018) Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

D7822-18 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

D6832-13(2018) Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

D6062-19 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

D8404-21 Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids

D6552-06(2021) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

D4413-98(2009)e1 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) (Withdrawn 2014)

D7441-08(2013) Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples (Withdrawn 2018)

D3687-19 Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

D7296-18 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

D8344-20 Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids

D4597-10(2021) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers

D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

D7659-21 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

D7458-21 Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection

D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

D7202-22 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

E1553-93 Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)

D4532-22 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors

D5337-23 Standard Practice for Setting and Verifying the Flow Rate of Personal Sampling Pumps

D4185-23 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

D4856-23 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

Standards & Publications Standards Products Adjuncts and Reference Radiographs Symposia Papers & STPs Manuals, Monographs, & Data Series Journals Compilations Technical Reports Reading Room COVID 19 Research Reports Book of Standards Digital Library Training Courses Enterprise Solutions Catalogs Tracker Services Certification Market Intelligence Laboratory Services Shipping and Handling Reading Room

Copyright © 1996 - 2024 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA